Get More Information
Call us NOW on
01427 810 810
give us your details using the boxes below or visit our Contact Us page.
Pallet Roller Conveyor
Roller Conveyor Straight
A robust pallet roller conveyor system. Rollers are driven tangentially by 5/8” chain in a fully enclosed side channel. The systems offers minimal backlash, easy tensioning and a 150mm roller pitch. With a load capacity of 1500kg per pallet the straight modules are available to handle upto 4500kg total conveyor load.
- Tangential chain drive
- 4 mm thick side channels 3 and 5 mm thick roller options.
- Chain tensioning done quickly without removing guards.
- 150mm roller pitch.
Chain Conveyor Straight
3/4” pitch flat sided linked chain provides a strong supporting surface to convey pallets up to 1500kg. These modules are available in two and three chain versions. Chain tensioning is quick and easy with no requirement to remove any guards.
- 1500kg pallet load capacity
- 4-mm thick side channels.
- ¾”pitch flat sided chain running on low friction, hard wearing polymer guide strips.
- Ability to run cables and pneumatics in side channel.
- Chain in same lateral position on each module.
- Giving a smooth clean appearance and aiding cable runs.
- Hollow crossties to enable cables to run from one side of the conveyor to the other.
Roller Transfer
Roller transfers are a self contained unit, which can be fitted to a new or existing chain conveyor straight. The pop-up roller is powered by two motorised rollers. With a nominal roller pitch of 150 mm for all pallet types these transfers offer exceptional support for pallets during the transfer operation.
- Tangential chain drive
- 4 mm thick side channels.
- 3 and 5 mm thick roller options.
- 150mm roller pitch.
Double Transfer
Double transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150 mm for all pallet types these transfers offer exceptional support for pallets during the transfer operation. The modules are available to suit the standard pallet conveyor widths.
- 150mm roller pitch.
- Bi-directional control available.
- Conveyor speeds of 12m/min and 18m/min
- Maximum pallet weight 1500kg
Chain Transfer
Transfer modules combine the features and benefits of the roller systems and chain conveyor in one module. With a nominal roller pitch of 150 mm for all pallet types these transfers offer exceptional support for pallets during the transfer operation.
- 150 mm roller pitch
- 3-mm thick steel rollers with steel sprockets
- ¾ “ pitch flat sided chain
- Types:
Single Handed Transfer to Transfer Unit
Single Handed Extended Transfer toTransfer Unit
Roller Turntable
The turntable module is designed to change the direction of pallet travel by rotation of the pallet through any angle from 90° to 180°, whilst keeping the relationship of the pallet runners to roller conveyor the same.
- Rotation angle of 90 to 180 degrees.
- 147 pallets per hour rotating 90 degrees.
- Two rotation speeds of 2rpm and 4rpm
- Conveyor speeds of 12 m/min and 18m/min
- Pallet dimensions 800/1000mm L/R
Chain Turntable
The chain turntable module is designed to change the direction of pallet travel by rotation of the pallet through any angle from 90° to 180°, whilst keeping the relationship of the pallet runners to roller conveyor the same.
- Rotation angle of 90 to 180 degrees.
- 174 pallets per hour rotating 90 degrees.
- Two rotation speeds of 2rpm and 4rpm
- Conveyor speeds of 12 m/min and 18m/min
- 900mm Chain centres
- Pallet dimensions 1200mm L/R
Beam Lift Assembly
The beam lift assembly is designed to lift pallets 200mm above the chain conveyor. The beam assembly has two standard types, low and high. Low types range from 650mm to 800mm top of chain heights. high type beam lifts range from 850mm to 1000mm top of chain height.
- Low and high type available.
- To suit 2 strand chain conveyor.
- 200mm Pallet Lift
- Maximum pallet weight 1500kg